27
REMOVING THE SmartMedia CARD
Do not remove the card if
or
is blinking in
the DM-9’s data panel.
1. Turn the camera’s main
switch to LOCK.
2. Open the card-slot door
and remove the card.
• Do not touch the electrical
contact area.
Data is written to the SmartMedia card after the
last exposure is taken and before the film is
rewound.
• All stored data is written to the card loaded when the film
is rewound.
• Store the card in its anti-
static case.
26
RECALLING DATA
8. Open the camera’s
control panel door and
press the adjust button.
9. Turn either control dial
to select data memory
On or Off, then press the
shutter-release button
partway down to enter
the selection.
• Or press the shutter-release
button partway down to return to
standard operation mode with
data memory on.
•
appears in the
camera’s data panel.
•
▲
appears below READ in the
DM-9’s data panel.
DM9E 12/15/98 11:37 AM Page 26
Summary of Contents for data memory back dm9
Page 1: ...INSTRUCTION MANUAL E DM9E 12 15 98 11 37 AM Page 1 ...
Page 2: ......
