Minolta CF2001P User Manual Download Page 71

Page: 71 / 121

Control Panel Messages

5-6

CF2001P

Load the paper into the drawer so
that the front side of the paper (the
side facing up when the package
was unwrapped) faces up.

Have you loaded too much pa-
per into the drawer?

Do not load so much paper that
the top of the stack is higher
than the

mark.

Has the paper been loaded correctly?

Make sure to align the stack of paper.

Do you wish to load a paper size or type different from that previ-
ously loaded?

For more details on changing the paper size and type, refer to
“Loading Paper” on page 4-7.

Slide the lateral guides against the
edges of the paper.

Make sure that the paper is not
curled when it is loaded.
Check that the lateral guides are
pushed up against the edges of
the paper.

Close the paper drawer.

Summary of Contents for CF2001P


























































































































Search results

Summary of Contents for CF2001P

Reviews:

Related manuals for CF2001P

Brands by name

Popular brands

Minolta CF2001P, User Manual

Search results

Summary of Contents for CF2001P

Reviews:

Related manuals for CF2001P

Brands by name

Popular brands