Minolta CF2001P, User Manual

Page: 102 / 121

Control Panel Messages 5
CF2001P 5-37
5.6 When the Message “xxxx unit near life limit” Ap-
pears
When it is almost time to replace a unit within this printer, a message like
the one shown below appears in the control panel.
When the message appears, replace the unit according to your mainte-
nance agreement.
Note
The display window only displays two lines of a message at one time.
To view messages longer than two lines, press
Ä
to display the next
line of the message.
Displayed Messages
G Advance warning message
When it is almost time to replace a unit, the message “xxxx unit near
life limit” appears in the control panel.
Prepare the new unit and replace it as soon as possible.
G
Replacement warning message
After the advance warning message has appeared, about 1,000 print-
outs can be made before the printer stops operating. (The number of
printouts depends on the selected print settings and the unit.) In addi-
tion, the message “xxxx unit over life limit xxxx” appears in the control
panel followed by instructions for replacing the unit.
Replace the unit according to the instructions that appear.
Disposing of Used Parts
Dispose of used units according to your local regulations, or contact
your technical representative.
Ready
Menu Set Cancel
Message
Alert
××××
unit
Ready
Menu Set Cancel
Message
near life limit