2. Extend the film tip to the "FILM TIP" mark,
making sure it lays flat.
3. Close the back cover.
• The film automatically advances to the first frame
and
appears in the data panel.
• If the film has been loaded improperly,
will blink
in the data panel and the shutter will remain locked.
Open the back cover and repeat the loading
procedure.
11
10
OK
Use only 35mm, DX-coded film rated ISO 25 to 3200.
• ISO 400 film is recommended for best results.
• Always load and unload film in subdued light.
• Do not use Polaroid instant 35mm film. Winding problems
may occur.
1. Slide the back-cover release down to open
the back cover, then place the film cartridge
into the film chamber.
•
Once the film is loaded, the back cover will lock until
the film rewinding is complete, preventing accidental
opening. If the release lever is slid to the open
position, “CLOSEd” will appear in the data panel.
LOADING THE FILM
Summary of Contents for 125
Page 31: ...59 58 NOTES ...
