manualshive.com logo in svg

MINOLTA-QMS PageScope, Software Manual, Page: 12 / 60

Share
Download
MINOLTA-QMS PageScope Software Manual Download Page 12

2 Installing and Starting Up the Server

6

2.3 Starting Up the Server

Windows 95/98/Me Platform

Click 

Start

 

→

 

Programs

 

→

 

Minolta PageScope

 

→

 

Start Server

. 

Note that when installing PageScope, you can configure the PageScope 
server to start up automatically whenever the system is booted.

Windows NT 4.0/2000 Platform

1.

Click 

Start

 

→

 

Settings

 

→

 

Control Panel

. 

2.

Double-click the 

Services

 icon. In the case of Windows 2000, the 

Services

 icon is located inside the 

Administrative Tools

 folder.

3.

Select 

Minolta PageScope Service

 from the list of services, and 

then click the 

Start

 button. In the case of Windows 2000, select 

Minolta PageScope Service,

 and then select 

Start

 on the 

Action

 

menu.

Solaris Platform

Note

PageScope starts up automatically after you install it. You can use the 
following command to start it up manually when necessary.

# /etc/init.d/pagescope start

Execute the following command when PageScope is already running, 
and you want to momentarily shut it down and restart it.

# /etc/init.d/pagescope restart

• Perform the following operation under root privileges.

Summary of Contents for PageScope





























































Reviews:

No comments