MINOLTA-QMS PagePro 4110W, User Manual

Page: 104 / 158

7
Installing optional accessories
7-6
7.3 Installing a DIMM memory module
This printer is equipped w ith 2MB of memory capacity as standard. The
memory capacity can be expanded to a m aximum of 66MB with
commercially available SDRAM-DIMM memory modules. Memory
modules of the following sizes may be used: 32 and 64MB.
This printer supports 32bit/100pin DSDRAM DIMM, which consists of
4 bit, 8 bit, or 16 bit SDRAM chips in JEDEC standard, such as:
l Viking: H4143A(32MB), H3913(64MB)
l Golden RAM: C4143A
l Melco (Buffalo): PM-HP32M(32MB), C3913(64MB)
l Crucial Technology: CT8M32S4P8(32MB), CT8M32S4P10(32MB),
CT16M32S4P8(64MB), CT16M32S4P10(64MB)
l Delkin Devices: DM100-032Y3Q488-10S1P(32MB), DM100-
032Y3Q446-10D2P(32MB), DM100-064Y3Q488-10D2P(64MB).
CAUTION
Your DIMM memory module could suffer irreparable damage!
DIMM modules are very sensitive. Handling them improperly can result in
damage to the module that will render them unusable.
Ü Before you unpack the module, touch a metal part of the printer to
cause static electricity to discharge from you.
Ü Hold the module only by the edges.
Ü Avoid touching the connections.
Ü
Always place the module on an antistatic mat when working with it.
Ü Do not touch any printed circuit boards in the printer.
DANGER
Risk of electric shock!
The printer contains electrical parts.
Ü
When installing a memory module, follow the instructions exactly.
Ü Always switch the printer OFF and unplug it from the power supply.
Ü
Only remove the covers which are specifically referred to in the step-
by-step instructions.