Minnich A-1C, Operators & Service Manual

Page: 63 / 73

- 63 -
LUBRICATOR
MINNICH P/N 001864-00000
CAPACITY: .5 PINT
PIPE SIZE: 3/4” N.P.T.
Item Number Minnich Part Number Description
1 001864-00001 Feeder Assembly Kit
2 001864-00002 Manual Relieving Safety Cap
4 001864-00003 Sight Window
6 001864-00004 Check Valve (Constant Feed)
006412-00916 Filler Cap O-Ring
006412-00905 Feeder O-Ring
LUBRICATOR IS SET AT 5.5 FROM FACTORY. DIFFERENT TEMPERATURES MAY AFFECT FLOW OR OIL. YOU
MIGHT HAVE TO ADJSUT LUBRICATOR ACCORDINGLY. BE SURE LUBRICATOR IS SET SO THAT YOU ALWAYS
HAVE A LIGHT FILM OF OIL ON EXHAUST DEFLECTOR.
TO ADJUST LUBRICATOR, DISCONNECT AIR PRESSURE FROM DRILL UNIT. PUSH DOWN ON PRESSURE
RELIEVING BUTTON ON FILL CAP. REMOVE FILL CAP. USING A SCREW DRIVER, ADJUST LUBRICATOR TO
REQUIRED SETTING. TO INCREASE OIL, SET AT HIGHER NUMBER. TO DECREASE OIL, SET AT LOWER
NUMBER.