GAS ASSIST LIFT MECHANISM:
To disconnect one end of the gas spring, follow the instructions below:
1. With the mount in the stowed position, locate the upper cylinder pin.
2. Using two Philips screwdrivers, remove 1 of the Phillips flat head screws.
3. Remove pin from outer arm by sliding thru the arm.
4. Now it is safe to deploy the motor and remove the motor assembly.
5. To re-connect the gas spring, see page 3, step 6.
WARNING
: The gas assist lift mechanism in this unit is under HIGH SPRING PRESSURE when the
motor is in the deployed position. DO NOT remove the BowGuard assembly from the mount without discon-
necting one end of the gas spring. Failure to do this can create a condition where accidental pulling of the
rope may cause the mount to spring open rapidly, striking anyone or anything in the direct path.
Philips Screw
Gas Spring Bracket
GASS
ASSIST LIFT MECHANISM
8
