a. Make sure that the Power Cables from the
battery are disconnected, or that the breaker,
if equipped, is "off".
1
Power Cables
WARNING
Make sure the motor is mounted on a level surface and is
not connected to a power source.
INSTALLATION
b. Place the mount on an elevated, level surface
such as a workbench or the tailgate of a pickup.
The motor should be in the stowed position.
c. Remove the four sideplate screws using a #3
Phillips screwdriver. Two of these screws will be
located on each side of the mount.
2
Deployed
Stowed
Sideplate Screw
2c
minnkotamotors.com | 2
©2018 Johnson Outdoors Marine Electronics, Inc.
The MKA-16-03 Electric Steer Quick Release Bracket is designed to work on a number of Minn Kota trolling motors. The
base extrusion or mounting bracket of the trolling motors may vary. Please note the appearance of the applicable trolling
motors and mounting brackets.
Ulterra
PowerDrive
Terrova
PowerDrive Pontoon
Hand Control Bracket
Inboard
Inboard
Inboard
Inboard
DeckHand 40
Inboard
NOTE:
A motor may weigh up to 65lbs. We
recommend having a second person help with the
installation. If mounting to a Pontoon Hand Control
Bracket or Deckhand 40, directions specific to motor
installation do not apply.