TEMP 65 °F
DPTH
5 ft
HDG 255°
TEMP 72 °F
DPTH
1 ft
BRG 359°
TEMP 72 °F
DPTH
1 ft
BRG 359°
Screen
Navigation
Ok
Speed
Up
Speed
Down
Dashboard
Info
Boxes
Prop
On/Off
Steer
Left
Steer
Right
Spot-Lock
Home
i-PILOT® LINK™ REMOTE
Header
Display
Screen
Content
Area
i-PILOT® LINK™
QUICK REFERENCE GUIDE
Compatible with all Bluetooth
®
enabled i-Pilot
®
Link
TM
Systems
Home
Press to bring up the Home Screen
Buttons.
Screen Navigation
Press to navigate the menu without
touching the screen. Press and hold to
lock and unlock the remote.
Ok
Press to accept menu selections. Press
to power remote on. Press and hold for
3 seconds to power remote off.
Speed Up & Speed Down
Press to increase or decrease motor
speed.
Steer Left & Steer Right
Press to steer the motor to the left or
to the right.
Prop On/Off
Press to turn the Prop on and off.
Spot-Lock
Press to enable and disable Spot-Lock.
PROP
SOG
mph
1.5
GPS Signal
Strength
Motor
Battery
Time
Talon
Remote
Battery
Humminbird
Connection
Motor Battery
t
n
Displays motor battery level when prop
is disengaged.
Time
Displays the current time.
Remote Battery
Displays the battery level of the remote.
Speed Over Ground
Displays the current speed over ground.
High Speed Bypass
Displays when High Speed Bypass is
engaged.
Prop On/Off
Displays when the Prop is enabled.
Rotates when the Prop is on and the
Prop Speed is greater than zero. Blinks
when a mode of navigation is used that
requires the prop to be enabled.
Cruise Control
Displays when Cruise Control is
engaged along with the Target Speed.
Prop Speed
Displays the current Prop Speed. Can
be adjusted in 1/2 speed increments
between 0 and 10.
PROP
SOG
Speed
Over Ground
Prop
On/Off
Cruise
Control
Prop
Speed
High Speed
Bypass
Legacy AutoPilot
The AutoPilot button is used to engage
and disengage Legacy AutoPilot.
Advanced AutoPilot
The AutoPilot button is used to engage
and disengage Advanced AutoPilot.
Record
The Record button is used to start and
stop recording an iTrack.
HSB
Select the HSB (High Speed Bypass)
button to engage High Speed Bypass.
High Speed Bypass automatically sets
the Prop speed to 10. Double press to
engage. Single press to disengage.
Lock Keys
Select the Lock button to lock the
buttons and touch screen. Pressing and
holding the Screen Navigation
button
also locks and unlocks the remote.
Cruise Control
Press the Cruise Control button to
enable or disable Cruise Control. Once
Cruise Control is enabled, pressing the
Speed Up
or Speed Down
buttons will change the Target Speed
rather than the Prop Speed.
Mark Waypoint
Press to mark a Waypoint.
Settings
Press the Settings button to open the
Settings menu and adjust settings
within the i-Pilot Link system.
Options
Press the Options button to open the
Options menu and adjust options
within the i-Pilot Link system.
Go To Spot-Lock
The Go To Spot-Lock button is used
to open a menu used to navigate to a
Spot-Lock location. The i-Pilot Link
system will only bring up Spot-Locks
within a quarter mile range.
Go To iTrack
The Go To iTrack button is used to open
a menu used to navigate to an iTrack.
The i-Pilot Link system will only bring
up iTracks within a quarter mile range.
Go To Waypoint
The Go To Waypoint button is used
to open a menu used to navigate to
a Waypoint location. The i-Pilot Link
system will only bring up Waypoints
within a quarter mile range.
Ulterra
t
The Ulterra button is used to access
functions specific to controlling the
Ulterra.
Bearing
Bearing is the direction from the
boat's current location to the target
destination during navigation.
Heading
Heading is the direction that the motor
is pointing.
Depth
Bearing
Temperature
Heading
BRG
HDG
t
Only available with Ulterra.
n
Only available with Ultrex.
i-PILOT LINK HOME SCREEN BUTTONS
INFO BOXES
i-PILOT LINK DASHBOARD
CONTROL BUTTONS
HEADER
TEMP
DPTH
Temperature
The current water temperature based on
communication with the Humminbird.
Depth
The current water depth based on
communication with the Humminbird.
Touch
Screen
Active
Area
Talon
GPS Signal Strength
Displays the level of GPS signal
strength. If no bars appear, or if the
bars are flashing, the system has not
yet acquired a GPS fix.
Humminbird Connection
Displays white arrows to show when the
i-Pilot Link controller is communicating
with the Humminbird. Grey arrows
indicate that there is no communication.
Talon
Displays the connection with one or two
Talons and indicates if the Talon(s) are
deployed. One Icon will display in the
event that one Talon is paired, and two
will display if two Talons are paired. The
icons will turn grey to indicate that the
Talon(s) is not connected.
minnkotamotors.com
©2018 Johnson Outdoors Marine Electronics, Inc.