INSTALLATION
INSTALLATION
Installing the CoPilot Receiver
b. Using a #2 Phillips Screwdriver, remove the four
1/4-20 x 5/8’’ Screws from the Right Sideplate
and Left Sideplate of the PowerDrive mount.
a. Make sure that the Power Cables from the
battery are disconnected, or that the breaker,
if equipped, is "off".
2
1
Power Cables
WARNING
Make sure the motor is mounted on a level surface and is
not connected to a power source.
Sideplate Screw
c. Remove the Right Sideplate.
d. Swing the Left Sideplate out and away from the
Base Extrusion.
3
3c
3d
Right Sideplate
Left Sideplate
Base Extrusion