INSTALLATION
INSTALLING THE COPILOT
Your new CoPilot accessory comes with everything you’ll need to directly install it on your trolling motor. These instructions are
intended to show how to install your CoPilot into the PowerDrive. Please review the parts list, mounting considerations and
tools needed for installation prior to getting started.
INSTALLATION PARTS LIST
•
#2 Phillips Screw Driver
•
#3 Phillips Screw Driver
MOUNTING CONSIDERATIONS
TOOLS AND RESOURCES REQUIRED
WARNING
We recommend installing your CoPilot while the boat is on your trailer in a stable position. The motor should be secured and
disconnected from a power source before beginning installation.
1
2
B
✖
This part is included in an assembly and cannot be ordered individually.
p
Not shown on Parts Diagram.
Item /
Assembly
Part #
Description
Qty.
A
2994112
CTRL BOARD V2 COPILOT RECEIVER
1
B
2994020
TRANSMTR, ASY, PD/AP COPLT (SUB)
1
1
2373418
SCREW-#8 X 5/8 PPHSMS S/S
2
2
2374092
CTRL BOARD V2 COPILOT RECEIVER
1
p
2377166
MANUAL - CO-PILOT POWERDRIVE
1
A