Page
18
of
34
3.10
– USING ART-NET
The Wireless Effects Controller (WEC) can also be used with Art-Net for live control via
software or a console and a wireless access point. To set up the Art-Net Configuration the
user must go into the configuration screen and then select the Advanced Mode. Once the
settings have been made then press save and then press reboot. The green illuminated
button on the controller with flicker when receiving data over the network.
Universes
The WEC allows up to 4 universes of
Art-Net. Select the correct universe
number that will be used with this
controller from your software.
Protocol
Select the Art-Net protocol to
enable Art-Net communication.
Use DDP for Minleon Apps
Output Configuration
This is where the user set up the controller’s output configuration
Output:
The WEC has 1 output
T’s:
Minleon Smart-T’s are unique to Minleon and allow the user to create
T’s that are independently controlled for use in grids and light curtains
Lights/Strings:
This is how many lights are connected to the WEC
Starting Slot:
The start channel used in the Art-Net universe stream
Summary of Contents for WEC
Page 1: ...Page 1 of 34...
