Page
16
of
34
3.6
– ON/OFF – STORING THE LAST EFFECT
3.7
– SETTING THE NUMBER OF LIGHTS CONNECTED
The controller is capable of connecting up to 400 lights with individual control. When
additional lights are connected to the controller then the user must set the correct number of
lights connected to enable the additional lights to work. The controller also uses the light
number for correct effect generation in some effects.
Under the configuration page you
can apply the correct number of
lights connected either in the
Direct-Connect Mode page or the
Network Mode page. For the
correct setting to take you must
then save the configuration.
ON/OFF
The on/off tab will turn the lights on and off but it will
also store the last effect into the controller’s memory if
the power to the controller is disconnected.
The last effect will play once the power has been
restored
Summary of Contents for WEC
Page 1: ...Page 1 of 34...
