8
Fig 17
Step 1. Remove the screws from the switch cup plate. While holding the switch cup, firmly snap the
wire molexes together. Next, slide switch cup up against plate and rotate it until the screw holes are
aligned. Secure switch cup to plate using the screws removed earlier. (Fig. 17)
NOTE: DO NOT PINCH WIRES BETWEEN THE SWITCH HOUSING AND THE SWITCH CUP PLATE.
Step 2. Attach the pull chain fob to the chain on the switch cup. (Fig. 17)
ATTACHING THE SWITCH CUP
SWITCH CUP
SWITCH CUP
PLATE
MOLEX
SCREWS
PULL
CHAIN
