instruction apply to ceiling fans that feature a DOWN light (
button) only or ceiling
fans that feature an UP light (
button) and a DOWN light ( button) that are
controlled independent of each other;
Press and release the button for desired light to turn the light ON or Off. Press and hold
The button to set the desired light brightness. The light will cycle between bright and dim
setting as long as the button is pressed. The light key has an automatic auto-resume
feature that allows the light to remain at the same brightness as the last time it was turned
off.
Note:
The wall control purchased is for use with DC motor ceiling fans only.
DC Ceiling fans cannot be installed with a solid state speed wall control or light dimmer.
Doing so will permanently damage your fan’s remote control receiving unit.
