HANGER BRACKET
CANOPY
CANOPY
CANOPY
RING
11
FINISHING THE INSTALLATION
Step 1. Remove the two screws and loosen the two screws on the hanger bracket.
Step 2. Install the canopy to the hanger bracket by aligning the key holes in the fan housing with the two screws in the
hanger bracket, then lifting the canopy up and turning clockwise. (Fig. 20)
Step 3. Re-tighten the two screws and re-install the two screws. Tighten all screws securely.
Step 4. Place the canopy ring over the top of the canopy. (Fig. 21)
FIG. 21
FIG. 20
SCREWS