Minka Group Aire 04638 Instruction Manual Warranty Certificate Download Page 15

14

CARE OF YOUR FAN 

Here are some suggestions to help maintain your fan.

1. Because of the fan's natural movement some connections may become loose. Check the support connections, 

brackets and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from the 
ceiling).

2. Clean your fan periodically to help maintain its new appearance over the year. 

CAUTION:

 many common household 

cleaning products contain chemicals that could dam

sh of your fan. Use only a soft lint free cloth and soapy 

water.  

3. If your fan is provided with wood veneer blades; you can apply a light coat of furniture polish for additional protection 

and enhanced beauty. Cover small scratches with a light application of shoe polish.

4. Use a lint free lightly damp cloth or duster to remove dust from the blades.

5. There is no need to oil your fan. The motor has permanently lubricated bearings.

6. If your fan is provided with glass shades, clean with lukewarm soapy water and a soft cloth or sponge. DO NOT 

IMMERSE GLASS SHADES IN HOT WATER. DO NOT PUT GLASS SHADES INTO AN AUTOMATIC DISHWASHER.

WARNING! 

MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX BEFORE YOU ATTEMPT ANY REPAIRS. REFER TO 

THE SECTION, "ELECTRICAL CONNECTIONS".

Summary of Contents for Aire 04638


















Reviews: