TIPS FOR EZ KART™ USE
Start digging your trench. Select a notch on the depth adjuster which gives both the desired
trench depth and a comfortable operating position for the control handle. Keep the handle as
close to vertical as possible with slight down pressure so that you retain control of the
GeoRipper® minitrencher at all times. You can use a finger under the remote throttle lever to
help control the RPM. Before changing to a different notch, throttle off and allow your digging
chain to come to a rest so that you retail full control of the GeoRipper® minitrencher at all times.
When trenching with the EZ Kart™, allow the GeoRipper® minitrencher to dig at a rate which
the soil type/condition allow. If excessive backwards pressure is used for the soil
type/condition, the GeoRipper® minitrencher will try to “surface” and the wheels will come off
the ground. This situation places unnecessary strain on all components, including the operator.
GEORIPPER® TROUBLESHOOTING
If engine does not start, check the air and fuel filters first. Replace filters if necessary. If engine
still does not start, check sparkplug for spark.
WARNING!
Not all sparkplugs are the same! Make sure to purchase the correct replacement plug for your
trencher. Incorrect sparkplugs can cause poor power, no power, or burnt piston. Using the
incorrect sparkplug will void the engine warranty.
Refer to powerhead Owner’s Manual for more information.
If you hear a squeal while trenching, or an unjammed digging chain will not rotate under full
throttle, check the belt tension of the trencher. Refer to powerhead Owner’s Manual for more
information.
11
