MINITECH
CNC Mini-Mill User's Guide
15.
Secure Work - Use clamps or a vise to hold work. Do not you your hands to hold work
down.
16.
Do Not Touch Machine When It Is On - Avoid touching any part of the machine while it
is operating. If the proper settings are made, and the work is fastened properly, there is
no need to touch the machine.
17.
Maintain Tools In Top Condition - Keep tools sharp and clean for best results and
safest performance. Follow instructions for lubricating and changing accessories.
18.
Disconnect Tools - before servicing and when changing accessories such as end mills,
and cutters.
19.
Avoid Accidental Starting - Make sure spindle switch is off before plugging in power
cord.
20.
Use Recommended Accessories - Consult the instruction guide. Use of improper
accessories may be hazardous.
21.
Check That All Holding, Locking, And Driving Devices Are Tightened - At the same
time, be careful not to over-tighten these adjustments. They should be just tight
enough to do the job. Over-tightening may damage threads or wrap parts thereby
reducing accuracy and effectiveness.
22.
Be Aware Of These Safety Precautions - and use these as a basis for your safety
protection. Implement your own safety rules in conjunction with these.
© 2012 Minitech Machinery Corp. 7
