Minitar MWIPC-1510WG User Manual Download Page 6

Page: 6 / 88

MWIPC-1510WG User Manual

VGA card with fully DirectX 9.0 supported.

VGA Card Resolution: 800 x 600 or above

4. Hardware

Installation

4.1.

LED and Focusing

The Camera head and its focus ring allow you to modify the aim and focus of the Camera.

To adjust the Camera’s focus, rotate the dark focus ring.

There are three LEDs indicating the camera status and networking status.

Power

When the camera is power on, the LED will light.

LAN

When the Internet Camera is linking to wired network, the LED is lighting. The LED is

flashing when video is transmitted or received through wired network.

WLAN

When the Internet Camera is linking to wireless network, the LED is lighting. The LED is

flashing when video is transmitted or received through wireless network.

Focus Ring

LED Green:

LAN Activity

LED Amber:

WLAN Activity

LED Blue:

Power On

Wireless SMA Connector

(Wireless Model Only)

Summary of Contents for MWIPC-1510WG














































































Search results

Summary of Contents for MWIPC-1510WG

Reviews:

Related manuals for MWIPC-1510WG

Brands by name

Popular brands

Minitar MWIPC-1510WG, User Manual

Search results

Summary of Contents for MWIPC-1510WG

Reviews:

Related manuals for MWIPC-1510WG

Brands by name

Popular brands