32
2. The rotary switch must be positioned in the proper
measurement function before connecting the test
leads to the device to be tested. Make sure to
disconnect the test leads from test points before
changing the rotary switch to a new function or
range.
3. If the multimeter is used next to equipment that
generates electromagnetic interference, the display
can become unstable or present incorrect values.
4. Do not allow that the instrument enters in contact
with water or any another liquid.
5.1 AC / DC Voltage Measurement
WARNING
Do not apply more than 600V DC or AC RMS between
the VA
Ω
HzCxTemp and COM input terminals. Exceed
these limits can result in dangerous electric shock
and damage to the instrument.
Take care to avoid contact with the circuit under test,
when working with high voltage.
1. Connect the red test lead to the VA
Ω
HzCxTemp
input terminal and the black test lead to the COM
input terminal.
2. Set the rotary switch to V position, and press the
SEL button to select AC (
) or DC (
).
3. Connect the test leads to the circuit under test.
The polarity to DC voltage is automatically
displayed. When the input voltage exceed the range
limit, the display will show (OL).
