MINIMOTO SPORT RACER
™
VEHICLE ASSEMBLY AND SET
UP:
CAUTION:
The included tools to set up
and charge the MINIMOTO SPORT RACER™
should be used by an ADULT ONLY. The
package contains some small parts.
Keep away from small children.
1)
Completely
remove the
MINIMOTO SPORT
RACER™ from the
package. Position
it upright and sup-
port it by moving
the kick stand to
the lower position
(Fig 1)
.
2)
Find and identify the following tools.
(Fig 2)
3)
Rotate the two han-
dlebars into position
(Fig 3)
.
NOTE:
Rotate the handlebars
inward or outward to
adjust the size and
driving position.
Moving them outward will give you more
room between your knees
and your hands.
4)
FIRMLY TIGHTEN the han-
dlebars using the tool as
shown
(Fig 4)
.
WARNING:
The handlebars
must not be able to move
when riding! ALWAYS test
the handlebars before riding to make sure
they will not slip, rotate, or be forced from
their desired position. If the handlebars
move when riding, it is possible to loose
control
and fall.
7
Fig 1
Fig 2
Fig 3
Fig 4
Allen Key
Screw Driver
Tire Valve
Connector
