background image

MINIMOTO SPORT RACER

WARNINGS:

This product is meant for outdoor use only

and only on private property.  Never ride

your MINIMOTO™ on sidewalks, public

streets, alleys, or other public roads or

thoroughfares.  It must never be ridden in

any area that could potentially do harm to

humans, animals, or someone’s property.

Never ride around the vicinity of small chil-

dren who may enter your path.

Special notes for supervising adults of

the rider:

1)

The decision to allow a rider to ride the

MINIMOTO SPORT RACER™ must be done

with the permission of a directly supervis-

ing adult.  The directly supervising adult

must read and follow all of the contents of

the owners manual before making this

decision.

2)

The rider must have previous experi-

ence in riding two-wheeled vehicles without

training wheels before attempting to ride

the MINIMOTO SPORT RACER™.  It is the

responsibility of the supervising adult to

ensure the rider has the specific talent,

physical ability, and training before allowing

him/her to ride the bike.

3)

The MINIMOTO SPORT RACER™ is

never to be ridden indoors.  Indoor flooring

and carpets can be damaged from abra-

sive contact with the tires.  The manufac-

turer will not be responsible for any indoor

damage if the MINIMOTO SPORT RACER™

is used in this manner.

4)

The MINIMOTO SPORT RACER™ is

designed to run on clean, flat, dry, and

generally hard surfaces by children over 8

years of age.  It should never be used on

gravel or grass. 

5)

The rider of a MINIMOTO SPORT

RACER™ should always wear appropriate

footwear.  Open-toed shoes should never

be allowed.  Keep shoe laces and pant

legs away and clear of the wheels.  

6) The rider must wear a safety helmet,

elbow pads and kneepads to avoid injury

from falling. Failure to wear a standard,

approved helmet may result in serious

personal injury or death.

7)

The MINIMOTO SPORT RACER™ is

never to be ridden by more than one per-

son at a time.  In addition, it is not

designed to pull or tow anything behind it,

as it may result in serious damage to the

motor or internal parts.  Do not exceed the

maximum capacity of 175 lbs (80 kg).

8)

The MINIMOTO SPORT RACER™ cannot

be used on wet surfaces or in wet weather.

Never immerse any part of the MINIMOTO

SPORT RACER™ in water.  Moisture can

damage the motor, switches, and drive

components.

9)

The MINIMOTO SPORT RACER™ should

never be ridden in mud, puddles, water,

ice, or on slick surfaces.  

10)

The electric motor can become hot

when in use.  Do not touch it at anytime

and handle it carefully.

3

Summary of Contents for Sport Racer





















Reviews: