18
Problem
Possible Cause
Solution
If the Baby Unit
has lost its link
with the Parent
Unit
The camera and monitor may be
too far apart
Move the monitor closer to the
camera
The link between both units has
been lost momentarily
Reset the units by disconnecting
them from the electrical power.
Wait about 15 seconds before
reconnecting. Allow up to one
minute for the Baby Unit and the
Parent Unit to synchronize.
The link between both units has
been lost
Pair the camera and monitor again.
See 5.2.6.
8. TECHNICAL SPECIFICATIONS
9. INFORMATION ON DISPOSAL OF THE PRODUCT
· Remember to dispose of the product in an environmentally responsible way, removing the
battery first.
· Do not mix products bearing the symbol of a crossed out bin with normal household waste.
· For proper collection and processing of these products, take them to the collection points
designated by local authorities. You can also contact the store where you purchased the product.
Frequency
2.4GHz FHSS
Operating Range
250m (straight line and open space)
Nº of configurable channels
4
Power
Input: 100-240 VCA 50/60Hz
Output: 5V 800mA
ENGLISH
Hereby, Miniland S.A. declares that this 89166 digital camera 2.4” is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Summary of Contents for Digital Camera 2.4"
Page 2: ...MNLXX XXXXX ...
Page 71: ......