USB Output
OK
To enable or disable this feature, click on the first of the icons that appear on the screen.
You must also select the camera's sensitivity level to motion detection from the 3 levels
available.
It also has an additional feature which allows the recording of images for a programmable
time period when the camera is activated on detecting a movement.
You can enable or disable this option by clicking on the icon and choose the length of
the recording period from the available options by clicking on .
·
USB Output
You can configure the USB output (13) choosing one of three options:
Motion Detection
Off
Low
5seg.
On
· USB Output
You can configure the USB output (13) choosing one of three options:
Click on the check box next to the icon if you want a computer to work as a charger
when you connect the monitor to it using a mini USB-USB cable.
Select the option to display the image of your baby monitor on your computer or mobile
device via the eMyBaby platform (www.emybaby.com). You have to connect the monitor to
the USB port of a computer using a mini USB-USB*.
Check the box next to the icon if you want to access the data stored in the micro SD
card from a computer, which must be connected to the monitor.
Click OK to accept the selection.
Note: The micro SD memory card and the mini USB-USB cable are not included.
· Software update
This feature allows the Miniland technical service to access the software of your device in
order to carry out maintenance or troubleshooting.
Summary of Contents for DIGIMONITOR
Page 2: ......
