Functional Switches explanation:
Volume (High Mid Low), (13)
It is used to adjust the sound volume on Baby unit at your preferred level.
Camera Auto (12)
When it is switched to Camera position, the camera will transmit continuously with non-stop.
Whereas it is switched to Auto position, the camera will only transmit when it is activated by
sound.
Transmission HI/LOW (8)
When it is switched to HI position, it can reach 300m in open field with its original transmitting
power. Whereas it is switched to LOW position, the transmitting distance is about 150m in
open field.
Night Light OFF AUTO ON (9)
When it is switched to ON position, the night light will be ON continuously non-stop. When it
is switched to Auto position, it will only be ON only when it is triggered by sound. When it is
switched to OFF position, the night light will be totally turned off.
Technical specification
Frequency: 2.4GHz DIGITAL (FHSS)
Camera: 4 x sizes AA alkaline 1.5V (not included)
Adaptor 6V 800mA Polarity Centre (+)
Intercom:
Lithium Battery 3.7V 1200mAh (included)
Or Adaptor 6V 800mA Polarity Centre (+)
Hereby, Miniland S.A., declares that this "Digimonitor 3.5" is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
BATTERY & PRODUCT DISPOSAL INFORMATION
· Remember, when you dispose of the Wireless Monitor to remove the batteries and dispose
of them responsibly.
· Do not mix products bearing the crossed out bin symbol with your general household waste.
For the correct collection and treatment of these products take them to the collection points
designated by your local authority. Alternatively contact the retailer who sold you the product.
Blurred image
- The camera lens is not properly adjusted.
- Move the camera lens (3) to focus the image.
- Unit has not been switched on.
- AC/DC adaptor has not been connected.
- Check if the CAMERA AUTO mode is switched on.
No transmission
at Camera
24