miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 16
•
Master mute
•
Volume Up: 1dB increments with ramping down when holding button
•
Volume Down: 1dB decrements with ramping down when holding button
•
Digital Source 1/2/3 used for a new I/O card (OUT OF SCOPE of this beta testing)
•
Config 1/2/3/4: Used to select one of the config built under the software. Make sure you’ve previously pre-configured
these first!
To program a command, 2 simple steps:
•
While connected and synchronized: Press the “LEARN button”
•
Point the remote to the IR receiver and press the button to learn the command. A dialog box will confirm a successful
learning and a green arrow appears once the command learned.
In case the platform fails to learn the remote command, you most likely do not have a Philips RC6/Sony/Nect compatible remote.
Please try another remote.
Feature such as Config 1-4 selection will
only
work when the unit is
not
connected/synchronized to the plug-in.
Command for Digital source selection is for future only and does not apply to any miniDIGI setup.
