USER GUIDE
32
5. Wait 2 minutes until the unit finishes booting.
6. Connect the lower network interface (
LAN 2
) to the network, and login with the
default IP address of the unit:
http://192.168.0.155/config
. The Login box
appears see Figure 27.
Figure 27 Login box
7. Type username:
admin
, password:
SAFEmode
. (Case sensitive). This
username and password works only after the reset procedure described above. A
menu appears, see Figure 28.
Figure 28 Menu
8. From the menu choose
Restore Factory Settings
. A warning appears see
Figure 29.
Figure 29 Restore factory settings
9. Click
Restore
. The factory defaults are restored and all user data, switch
configurations, user names and passwords are erased. When the process finishes
Figure 30 appears.
Figure 30 Reboot
10. Click
Reboot
to restart the unit. The following message appears.
Figure 31 System restarting
