iCENTRAL MINICOM USER MANUAL
20
TROUBLE SHOOTING
Because Minicom automatically resets at the completion of all intercom call
functions, there are few areas (with installation and testing completed and
instructions read) that should cause any problems.
If any problems are experienced, please check the applicable section in this
manual.
Below are the most common problems and their solutions.
CHIME NOT SOUNDING AT ROOM STATION(S)
Increase the Slide Volume Control setting(s) at station(s) where chime cannot be
heard.
NO OPERATION FROM SYSTEM AT ALL
Ensure DC plugpack is plugged in properly and power point is turned on.
If you have doubts, do not hesitate to contact your local distributor for professional
service and advice.
