12
12. Operating the Smart KVM Extender
Once the system is connected there are 2 ways to switch between the 2 computers /
KVM workstations.
•
On the Receiver press the Select button
Or
•
On the keyboard press
Shift
followed by + or -.
The Receiver Control LED
Status Meaning
Off
User at Receiver working on Receiver computer
On
User at Receiver working on Transmitter computer
Blinking
User at Transmitter working on Transmitter computer
The Transmitter Control LED
Status Meaning
Blinking
User at Receiver working on Transmitter computer
Off
Any other situation
Adjusting the picture
When the Receiver has control of the Transmitter’s computer, adjust the picture
quality where necessary using a small flat screwdriver to turn the Picture adjuster
located on the Receiver’s rear panel. See Figure 6.
All manuals and user guides at all-guides.com
