background image

E 1

E 2

E 3

E 4

E 5

E 6

E 7

H S

2.5KG

220W

390*420*720
       (mm)

17KG

1

13L

2

18L

3

25L

4

32L

C H

220W

TROUBLESHOOTING/SPECIFICATIONS

Troubleshooting

Function of fault alarm and flash

  Exceptional 

phenomenons

  Cause

  Sensor of water 

     lever series

  Solution

 No indication

  in controller

  The power plug is not plugged tight,

    the Power switch is not switched

  No display

  No display

  Re-plug the power plug,
   press”POWER”button

  Power socket no electricity or 

        fuse disconnection

  Check the power socket or fuse

  After the failure Of electricity

supply, it need to re-operation 

  After the electricity, Wash Rinse 
Spin Normal four indicator lights up 

  After the electricity, 

 please re-operation

  Overhigh voltage or low voltage   Low voltage no display, overhigh

voltage may cause the fuse damaged

  Pull the plug, use after the
   voltage return to normal

  Enter water
      failure

  Have not open the tap, stop water, low water pressure,
  water have not reach the set water level after 20minutes 

  Open the tap, Clean the netting according to 
    the method of “Cleaning the water inlet”

  Drain failure

  The drain house is placed too high or have not lay down
     the drian hose. The drain hose is wrung or jammed. 

 Check the drain hose, lay the drain hose lowly, press

 “Start/Pause” button after checking. Open the machine 

   cover and close the machine cover for alarm free

  Open abnormal 

  Safety lid is open

  Closed the lid

  Touch the 
shell during 
the spinning

  Cloth are uneven in tub causes its unbalance and rub
 the shell. Washing machine will adjust itself. After twice 
 adjustment,if it still in unbalance,it will Be warning.

  Open the lid, put clothes well, close the lid

  Overhigh 
 water level

  Water level up on the highest safety water level

  PCB can Auto-precess

  Sensor of water
  lever abnormal

  Stage frequency less than high water level limit 
  or exceed than low water level limit, will shows 
               sensor of water lever error alarm

  Please ask professional person to check

  Pause 
abnormal

  Pause time exceed 10 minutes

  Please press the “start” button

   Water
 recycling

  The water recycling program group the last time
                       before dehydration tips

  Open and close the cover or press the start button

   Tub self-clean 
            tips

  The indicator shows tub self-clean tips

  Please press the “start” button

  Fault cause and solution for the washing machine without digital display are same as above, the alarminstructions are as follows:
  Enter water failure: wash, rinse, spin indicator flash; Drain failure: Wash Rinse indicator flash; Spin abnormal: Rinse, Spin indicator
  flash; Touch the shell during the spinning ; Wash, spin indicator flash; Sensor of water lever abnormal: Water level indicator flash.  

Notes: Automatic adjustment is to stop spinning and change to reverse frequently cloth to make even. Too much or too
little cloth, or putting washing machine not in horizontal level, it will cause spinning in unbalance. It will automatic 
adjustment and increases rinsing times.  

  Specifications

  Model

  Voltage

  Capacity

  Rated wash power

  Rated spin power

  Water level

  Water Volume

  Net 

Weight  Product size

  Noise

  Noise

70db

  Feed water 

  

pressure

 Water Proof

XQB25-725H

220V/60Hz

9

Summary of Contents for XQB25-725H












Reviews: