|
26
|
Follow the installation instructions to install the washer more conveniently.
Installation Guide
- Notch below the marking hole.
- Drill a hole perpendicular to the wall surface.
※
Do not drill a hole on the edge of wall tile.
※
Do not drill a hole right below the faucet.
4-1. Drill a hole through tile
- Set the hammer drill perpendicular to the wall
surface and then drill a hole into the retaining
wall.
※
Follow the instructions on the diameter and depth
specifications for the hole.
※
Remove dirt from inside the hole.
4-2. Drill a hole into the retaining wall
- Insert set anchors into holes.
- Set anchors are included in the product
package.
※
Insert set anchors to the end of holes.
※
The set anchor bolt must be 75mm long or longer above
the wall.
5. Insert set anchors (4 holes)
- Inject chemical anchor into the fixed set anchors.
- Insert cushion pads on the fixed anchors.
- Attach pads to the wall.
10. Inject chemical anchor and insert cushion pads
- Place hoses in the hole.
※
Prevent the hoses from becoming jammed between the
wall and washer.
9. Organize hoses
- Install the washer on the surface of wall so as
not to create a large gap.
11. Install the washing machine
Lock the water supply valve
Disassemble the water supply valve
Install the branching adapter (Install adapters respectively on cold and hot water taps)
Branch off the inlet hose
13-2. Install the inlet hose - Kitchen sink, shower
- Run a test operation to identify any
malfunctions or leaks.
14. Test Operation
Hot water
For
hot
water For
cold
water
Cold
water
미니_DWD-M221MB(영)_호주향_1도.indd 26
2017-07-04 오후 4:46:37
