Mini CONVERTIBLE Owner'S Manual Download Page 52

Page: 52 / 324

Safety information

Warning

Operating the integrated information sys-

tems and communication devices while

driving can distract from surrounding traf-

fic. It is possible to lose control of the ve-

hicle. There is a risk of accident. Only use

the systems or devices when the traffic

situation allows. As warranted, stop and

use the systems and devices while the ve-

hicle is stationary.

Compatible devices

General information

Information on compatible mobile devices

is available as follows:

–

On the MINI

homepage.

–

Via Hotline/Customer Support

–

At a dealer's service center or another

qualified service center or repair shop.

Displaying the vehicle identification

number and software part number

With a search for compatible devices, you

may have to state the vehicle identification

number and the software part number.

These numbers can be displayed in the ve-

hicle.
Via the Central Information Display (CID):

"My MINI"

"System settings"

"Mobile devices"

"Settings"

"Bluetooth® info"

"System information"

A software update, refer to page

, can

be performed.

Bluetooth connection

Functional requirements

–

Compatible device, refer to page

with Bluetooth interface.

–

The vehicle key is in the vehicle.

–

The device is ready for operation.

–

Bluetooth is activated on the device and

in the vehicle, refer to page

–

Bluetooth presettings, such

as visibil-

ity, may be required on the device; refer

to the operating instructions of the de-

vice.

Switching on Bluetooth

Via the Central Information Display (CID):

"My MINI"

"System settings"

"Mobile devices"

"Settings"

"Bluetooth®"

Activating/deactivating telephone

functions

To use all supported functions of a mobile

phone, the following functions must be acti-

vated prior to pairing.
Via the Central Information Display (CID):

"My MINI"

"System settings"

"Mobile devices"

"Settings"

Select the desired setting:

–

"Office"
Activate function to transmit short

messages, e-mails, calendars, tasks,

memos, and reminders to the vehi-

Seite 52

AT A GLANCE

General settings

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands