Updated 06/08/2018
4
Version 1.1
OPERATING THE OMNIKCAUDIO
Note: Please allow the device to charge 4-6 hours before use.
HOW TO CHARGE THE OMNIKCAUDIO
1.
Remove the cap from the top of the device (see page 3).
2.
Plug the MicroUSB cable into the USB port on the device
(see page 3).
3.
Plug the other end of the USB cable into your PC or into a
AC wall charger.
HOW TO TURN ON THE OMNIKCAUDIO
1.
Press and release the Power button (see page 3). The red
LED indicator light will turn on and be solid.
2.
The device is now on.
3.
To turn off the device, press and hold the Power button
once more. The LED will turn off, and the device is now off.
HOW TO USE MANUAL RECORDING
1.
Make sure the Record Mode switch is to the right.
2.
Power on the device and wait until the LED turns solid red.
3.
Press the Manual Record button (see page 3). The red LED
will flash, and the device has begun recording.
4.
To stop recording, press the Manual Record button once
more. Once the red LED turns solid, the device has
stopped recording and automatically saved the file.
HOW TO USE VOICE ACTIVATION MODE
1.
Flip the Record Mode switch to the left.
2.
Power on the device.
3.
Once the device detects audio, the LED will flash red, and
the device will begin recording.
a.
It will record for 30 seconds. If there is no more
voice detected within those 30 seconds, the device
will save the audio file and return to standby mode.
