OPERATING THE MINI COVERT
NANNY CAM
IMPORTANT NOTICE: Allow the device to
charge 4 – 6 hours before using. Before
using the mini covert nanny cam, you will
need to remove the plastic tab from the
remote.
HOW TO CHARGE THE MINI COVERT
NANNY CAM
1.
Plug the USB cable into your PC
2.
Plus the USB cable into the clock
The red indicator light will be
on while charging
HOW TO SET THE TIME AND DATE
You can set the time and an alarm on this
model.
Four buttons that you need for setting up
the mini clock camera are located beneath
the LCD screen (see Figure 2):
HR (Hour)
MIN (Minutes)
SET
LIGHT
Set the Time
1.
Push the SET button
Both the hour and the
minutes will be flashing
2.
Push the HR button to set the hour
3.
Push the MIN button to set the
minutes
Set the Alarm
1.
Push the SET button two times
The Set Alarm icon will be on
Both the hour and minutes
will be flashing
2.
Push the HR and MIN buttons to set
the time when the alarm should
sound
Set Voice Notifications
1.
Push the SET button three times
The Every Hour
Announcement, Alarm
Sound, and Alarm On / Off
icon will be flashing
2.
Push the MIN button to turn the
alarm on or off
3.
Push the HR button to switch
between the alarm going off just on
the time you set, or for the clock to
announce the hour every hour
Turn On the Light
1.
Push the LIGHT button
The blue background light
will come on for about 8
seconds before automatically
turning off
PREPARING THE DEVICE FOR USE
1.
Be sure the On / Off Switch located
under the rotating panel is set to ON
2.
Insert a MicroSD card into the slot
located under the rotating panel
3.
Make sure the mini covert nanny
cam has been fully charge
4.
Place the device where you want to
record
USING THE REMOTE
Power Button
Motion Detection Button
Video Button
Camera Button
