Updated 06/30/2016
3
Version 1.0
o
NOTE: For iOS devices you must wait until the WiFi
Signal appears next to your Phone Carrier Name in the
status bar at the top of your phone screen.
8.
Once the app opens, tap the “Device Management” button.
9.
Tap the plus (+) symbol at the top of the screen.
10.
Use your device’s camera to scan the QR code on the sticker
on the bottom of the device.
11.
All the camera’s information will be filled in automatically
12.
Tap “Save”
13.
The new camera will be listed in the “Device Management”
screen and will say “Device on-line”
14.
Tap the camera to make it your active device and you will be
returned to the home screen of the app.
15.
Tap “Recorder Setting” to view the live stream of the camera
video.
16.
From this screen, you can choose to use Motion Activated
recording or Normal Mode (continuous recording)
CONNECTING THE DEVICE TO YOUR WIFI FOR REMOTE
VIEWING
1.
From the home screen of the app choose “Device
Management”
2.
Tap the Settings gear next to your camera
3.
Next choose “Internet Wi-Fi Setting”
4.
Flip the switch to the “on” position.
5.
Tap the “i” with a circle around it in the SSID field.
6.
Select your network from the list of available networks.
7.
Enter your WiFi password in the password field and press
“Save” at the top right
8.
A dialog will pop up that says “operation succeeded”
9.
The device will reboot. You will know the device has
connected to your WiFi successfully when the camera shows
Online in device management as “Device on-line”. This may
take up to 5 mins. You may pull down in the list to refresh the
screen.
10.
Once the device shows as Online, confirm that it connected to
your WiFi successfully by opening the settings app on your
phone and choosing your WiFi settings. If you connected
successfully, the device will no longer be generating its own
WiFi signal and you should be connected to your own WiFi.
o
NOTE: If you still see a network broadcasting that is the
named after the ID on the bottom of your device,
connecting to your WiFi has failed. Please repeat steps
1-6 above and pay careful attention to the network
password you entered.
11.
The device is now connected to your WiFi and may be
accessed from anywhere that your phone has an internet
connection.
HOW TO USE FILE OVERWRITE RECORDING (LOOP
RECORDING), SET MOTION RECORDING LENGTH AND MOTION
DETECTION SENSITIVITY
File overwrite recording allows the device to continue to record when
the memory card becomes full. In the event that the memory is full,
the device will delete the oldest file on the memory card and then
create a new file.
1.
Open the live video stream of your camera.
2.
Once the video is streaming, “Setup” button at the top right
3.
Switch the “Overwrite” switch to the on position.
ADJUSTING ADDITIONAL SETTINGS
1.
You may set additional settings such as the time/date stamp
and resolution by accessing “Program Setting” from the main
menu.
