18
2)
Establishing a Connection:
Once your IP settings are set as desired, return to the GUI main screen and open the
drop-down in the “Serial Number” field. Select the option that displays the serial
number of your unit and the suffix “-IP”.
Figure 18: Drop-down with connection options – IP
Selecting the IP connection option will open the Ethernet Configuration prompt
shown below:
Figure 19: Ethernet Configuration prompt
You should see the serial number of your unit, IP address and the TCP/IP port
number from Ethernet Settings displayed in their respective fields. The default
TCP/IP port is 80. You should not have to change the entries in these fields.
If you selected “Use Password” in your Ethernet settings, enter your password in the
“Password” field. You then have the option to communicate with the ZTVX using
HTTP or Telnet protocols. Select the protocol you wish to use and click “Connect.”
Once the connection is established, the protocol field will read “IP” with the
appropriate communication protocol (HTTP or Telnet) selected, the IP address of the
unit will be displayed in the “IP” field, and the “Connection Status” field will read
“Connected”.
