3.1.3
Mini-Circuits USB to I/O controller software
will start for the unit you
selected.
Figure 3.1.3:
Initial screen(shown for USB-I/O-16D8R)
3.1.4
Functions of the Mini-Circuits USB to I/O controller software
Page 16 of 17
AN-49-004 Rev.: A (November 26, 2014) M149081 (R88277) File: AN-49-004(A).doc
This document and its contents are the property of Mini-Circuits
#
Name
Description
1
Config Digital
Byte B
Sets Digital Byte B (pins 1-8) to either Input or Output mode
2
Config Digital
Byte A
Sets Digital Byte B (pins 9-16) to either Input or Output mode
3 Set
Relays
Allows switching each relay between "Common to NO" and
"Common to NC"
4
Set Digital Byte
A
When Byte A is in output mode allows setting each bit to '1' or
'0'
5
Set Digital Byte
B
When Byte B is in output mode allows setting each bit to '1' or
'0'
6
Binary word to
send
Specifies the binary word to transmit in SPI mode
7
Send
Transmit SPI string
8
Pulse width
Sets the pulse width for the SPI Data and Clock
9 Relay
Status Displays
current status of the Relays
10
Byte A Status
When Byte A in Output mode displays status of Byte A, and
when Byte A in Input mode displays received byte
11
Byte B Status
When Byte B in Output mode displays status of Byte B, and
when Byte B in Input mode displays received byte
12 SPI
bits
Selects bits to be used for SPI transmission (must be from byte
in output mode)
3
4
5
6
7
8
2
1
9
10
12
11