Test Solutions - User Guide
Page 15
RCM Series Compact Modular Test Systems
4-Oct-17 (A3)
8)
An “Installation Complete” message will appear once the software is successfully
installed. Click “OK” to close the installer.
Figure 9: Installation complete
7.3.
Connecting to the Hardware
When starting up the GUI software, a window will pop up prompting you to choose how the
computer will connect to your RCM Series unit. You have the option to connect via USB,
Ethernet-TCP/IP, or to run the program in Demo Mode. Each of these options is discussed
below.
Figure 10: Connection menu
Connecting via USB
If connecting to the hardware via USB, click “USB” on the left side of the connection
menu, and the GUI main control will open.
