Mini?Cam Proteus ACR350, Original Instruction Manual

Page: 60 / 80

Proteus ACR350/500
60
Version B
Problem Solution
Blocked mode doesn’t
clear or reappears
constantly Make sure Motor Stop button is not pressed
and the lid is fully closed. Check if the cable
can move freely both ways.
Contact
Mini-Cam Service Department
if
the problem persists.
Rewind speed is not
corresponding to the
crawler speed Make sure you have selected the right
wheel size. Adjust the rewind speed using
keyboard buttons. Contact
Mini-Cam
Service Department if the problem persists.
Pay-out speed is not as
expected.
Make sure that tension bar is not bent,
obstructed by loose cable or any other
objects. Check the payout speed limit
adjustment. Contact
Mini-Cam Service
Department
if the problem persists.
Status LED changes colour
very often Tension bar needs calibration. Contact
Mini-Cam Service Department if the
problem persists.
Internal cable blockage Operator can’t fix an internal cable blockage.
Contact
Mini-Cam Service Department
.
Troubleshooting