5
CHARGING INSTRUCTIONS
This unit operates on a built-in Li-ion battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output of
DC 5V, 1000mA.
Note:
The DC input jack located on this unit is mainly designed for charging the built- in
Li-ion battery. The unit will still operate normally while charging, but doing this may
reduce the battery life.
CHARGING THE BATTERY
1. Charge the built-in Li-ion battery a minimum of 4 hours prior to first use.
2. Plug the unit into a USB port on your computer or into a USB power adaptor
(not included) using the included USB cable.
3.
Unplug the USB cable from the power source once the battery is fully charged.
4. After prolonged use, the battery voltage may discharge and operation might become
intermittent. When the internal battery charge is very low, the power button backlight
will begin flashing
slow green & fast red alerting you to recharge the internal battery.
Battery Note and Care
*
Do not burn or bury batteries.
*
Do not puncture or crush.
*
Do not disassemble.
*
Recycle Li-ion batteries. Do not dispose of in the trash.
*
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and current
settings are correct for the battery pack being charged.
*
Charge batteries on a fireproof surface away from flammable items or liquids.
*
Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
*
Follow the manufacturer’s instructions for charging the product and do not charge
longer than recommended. Unplug the charger when the battery is charged or not
in use.
TURNING THE SPEAKER POWER ON/OFF
1. In standby mode, tap the POWER button to turn on the unit, the power button
backlight will light up green and begin blinking slowly.