MINGDA TECHNOLOGY CO.,LTD
Note:
remember to put the white line with installation extrusion as above
In addition, here we discuss the installation of filament. Before delivery goods
to you we have previously installed consumables line for you, so, here
introduce you how to change filament. and some matters need attention.
Filament
（
Has been properly installed
）
If you want to remove the old filament , and put in the new line, that must be
done under the conditions of nozzle heating, loosen the extruder of the spring,
after the nozzle temperature reach consumable wire melting point, you can
remove the old line. After inserting new consumables line in, must pay
attention that inserted filament to the bottom of nozzle, and then continue to
push, and observe whether there is melting consumable wire extrusion, if have
a silk flow out from the nozzle then installation of filament is successful, and
please lock screw rod of extruder.
Note:
when installing consumables line some users can't push it to the top to
the extrusion head(nozzle), and lead it can’t flow out the silk when start printing,
so, we suggest use scissors or fire make the filament to be apiciform, then it
will be the more reach the extrusion head.
filament head
3
