MINGDA TECHNOLOGY CO.,LTD
temperature.
Heating bed temperature:
set the temperature of the workbench, the function
of heating workbench is that the print items can paste on the workbench firmly,
also can prevent the ABS materials become warped edge printout.
Wire feeding test: for checking whether the wire feed is normal or not, the right
side frame is to fill the wire length.
Hard Waste test: for checking whether wire acceptance is normal or not, The
right frame is to fill the wire acceptance speed.
Speed adjustment: In the process of printing. If need to set the acceleration
and deceleration, fill in the Numbers (%) first, then click on the confirmation,
The too fast printing speed maybe will lower print quality and wire feed rate,
please use this function carefully according to the actual situation of print
items.
Print steps as follows:
1. Choose the corresponding port number, baud rate use 250000 and then
click on the Connection..
2. Click "open" to load the file which was generated by sliced
3. If it is necessary to Set down the temperature of the heating bed and click
the "Set" to start the heating bed.
4. Cli
ck "print" button, and the machine was entered the stage of preheating.
5.Waiting. after the temperature rise to a specified temperature, then can begin
to print.
Method Two
：
SD card offline printing
Please put the slice file(generated well) to save to the SD Card catalogues,
(note:the file name cannot be Chinese)
Insert SD card in the card slot, press enter into the menu interface.
Select the SD Card
→
Press into the SD card interface, shown the file which is the slice file(g-code)
of deposited in the SD card. Rotate to choose the print documents, after
pressing, the machine will be printing automatically.
23
