KS60002-1H
８．
８．
８．
８．
Voltage output type
Voltage output type
Voltage output type
Voltage output type
Cable method
Connector method
Terminal Box method
Current output type
Current output type
Current output type
Current output type
Cable method
Connector method
Wiring diagram
Wiring diagram
Wiring diagram
Wiring diagram
MinebeaMitsumi Inc.
Sensing Device Business Unit
4
Terminal Box method
①
①
①
①
②
②
②
②
③
③
③
③
④
④
④
④
'９．
'９．
'９．
'９．
Countermeasures to be taken for abnormalities.
Countermeasures to be taken for abnormalities.
Countermeasures to be taken for abnormalities.
Countermeasures to be taken for abnormalities.
If there should arise an abnormality in the pressure transmitter, contact our company
If there should arise an abnormality in the pressure transmitter, contact our company
If there should arise an abnormality in the pressure transmitter, contact our company
If there should arise an abnormality in the pressure transmitter, contact our company
or dealer from which you have purchased.
or dealer from which you have purchased.
or dealer from which you have purchased.
or dealer from which you have purchased.
The content of this manual is subject to change with out notice.
The content of this manual is subject to change with out notice.
The content of this manual is subject to change with out notice.
The content of this manual is subject to change with out notice.
Wiring of 4 line type serves as the standard for the purpose of compensation of the
Wiring of 4 line type serves as the standard for the purpose of compensation of the
Wiring of 4 line type serves as the standard for the purpose of compensation of the
Wiring of 4 line type serves as the standard for the purpose of compensation of the
zero point error according voltage output use of this unit to cable length. Although
zero point error according voltage output use of this unit to cable length. Although
zero point error according voltage output use of this unit to cable length. Although
zero point error according voltage output use of this unit to cable length. Although
the use as a wiring of 3 line type (it is common COM about white or blue ) is also
the use as a wiring of 3 line type (it is common COM about white or blue ) is also
the use as a wiring of 3 line type (it is common COM about white or blue ) is also
the use as a wiring of 3 line type (it is common COM about white or blue ) is also
possible, when cable length is extended, the zero point error of about 1.3 mV/m
possible, when cable length is extended, the zero point error of about 1.3 mV/m
possible, when cable length is extended, the zero point error of about 1.3 mV/m
possible, when cable length is extended, the zero point error of about 1.3 mV/m
occurs. (at the time of our company cable use)
occurs. (at the time of our company cable use)
occurs. (at the time of our company cable use)
occurs. (at the time of our company cable use)
The shield wire must be earthed without fail. If not earthed, when a surging voltage
The shield wire must be earthed without fail. If not earthed, when a surging voltage
The shield wire must be earthed without fail. If not earthed, when a surging voltage
The shield wire must be earthed without fail. If not earthed, when a surging voltage
is applied, pressure transmitter will result in damage.
is applied, pressure transmitter will result in damage.
is applied, pressure transmitter will result in damage.
is applied, pressure transmitter will result in damage.
Separate the cable as much as possible from the power line. If not separated as
Separate the cable as much as possible from the power line. If not separated as
Separate the cable as much as possible from the power line. If not separated as
Separate the cable as much as possible from the power line. If not separated as
much as possible, a trouble of output interference will be caused due to power
much as possible, a trouble of output interference will be caused due to power
much as possible, a trouble of output interference will be caused due to power
much as possible, a trouble of output interference will be caused due to power
noise etc.
noise etc.
noise etc.
noise etc.
When measuring voltage output, load resistance will be more than 5Ω.
When measuring voltage output, load resistance will be more than 5Ω.
When measuring voltage output, load resistance will be more than 5Ω.
When measuring voltage output, load resistance will be more than 5Ω.
When measuring current output, load resistance will be less then 500Ω.
When measuring current output, load resistance will be less then 500Ω.
When measuring current output, load resistance will be less then 500Ω.
When measuring current output, load resistance will be less then 500Ω.
MinebeaMitsumi Inc.
Sensing Device Business Unit
4
