5 Cable connections
5.1 General information
Cable entry must be from below.
Connect the wires to the terminals according to the color coding .
Connect all cable shields in the metal sleeve of the junction box cable glands, see
Chapter
Establish potential equalization, see Chapter
Note:
Chapter
shows an example of the cabling of 8 and 12 load cells via the PR 5510/04
interface and the PR 6024/68S junction box.
5.2 Data and supply cables
The PR 6124/xxD data cable must be used to connect the PR 6024/68S cable junction box
to the device, max. length: 300 m.
The PR 6124/xxP power cable must be used to connect the PR 6024/62S power supply to
the PR 6024/68S cable junction box, max. length: 200 m
5.3 Cable connections
Note:
All components are only shown schematically.
Color Code
rd
=
red
gn
=
green
bu
=
blue
gy
=
gray
5 Cable connections
Cable junction box for digital load cells PR 6024/68S
Minebea Intec
EN-15
Summary of Contents for PR 6024/68S
