Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 67 / 94

WP-A WP-A Max 3000g d= 0.1g
0 0
gg
180g 200g 220g
Scale
Production line
Recipe
Setpoint
Difference
Manual Taring
PL 1
Fill manually
200.0 g
200.0 g
Stop Split LOT no. Done Recipe
? ?
Scale-A
Start dosing
Start Stop
If you press [Start], the input is not queried and the device is tared. Alternatively, you can
use the conigured input to trigger taring. This will switch to the overview.
Selecting [Stopp] will give the phase "Hold" status. Selecting [Continue] will make this
conigured dialog window appear again.
7.3.12 Starting Recipe on the Device
Recipes can be started from Maxxis 5 (local start) at any time.
- Requirements, see Capter 7.3.12.1
- Procedure, see Chapter 7.3.12.2
7.3.12.1 Requirements
- In PR 8400 (P), recipes are created with [Create] for the respective
production line.
- Access to the recipes available in PR 8400 (P) has been activated under
[Recipe] - [Create] /[Edit] for each recipe [Recipe access] (usually this is already
activated).
- Connection between Phase and PR 8400 (P) has been set up; if not, the
message "Unable to load recipes" will appear on the device display.
- In Maxxis 5, the parameter has been set to [Recipe] under [Coniguration] - [Local
control] - [Local start] .
7.3.12.2 Procedure
Scale-A
Scale-B
Free
Gross
Free
Gross
0.3 g
595 kg
Recipe
1. Select [Visualization] in the operating menu and conirm.
7 Operation and visualization of the scales Phase PR 5900/81
Minebea Intec EN-65