Minebea Intec CSD-918 Series, Operating Instructions Manual

Page: 208 / 240

— I/O SETTING 2/6 I/O setting screen 2/6
— I/O INPUT FROM 1 TO 9 see Chapter 10.3.2
— I/O SETTING 3/6 I/O setting screen 3/6
— I/O INPUT FROM 10 TO 11 see Chapter 10.3.2
— I/O SETTING 4/6 I/O setting screen 4/6
— I/O OUTPUT FROM 1 TO 9 see Chapter 10.3.3
— I/O SETTING 5/6 I/O setting screen 5/6
— I/O OUTPUT FROM 10 TO 11 see Chapter 10.3.3
— I/O OUTPUT LOGIC see Chapter 10.3.4
— I/O SETTING 6/6 I/O setting screen 6/6
— ZERO KEY LOCK see Chapter 10.5
— GROSS/NET KEY LOCK see Chapter 10.5.2
— TARE KEY LOCK see Chapter 10.5.2
— BRAND CODE KEY LOCK see Chapter 10.5.2
— F KEY LOCK see Chapter 10.5.2
— MENU KEY LOCK see Chapter 10.5.2
— CALIBRATION KEY LOCK see Chapter 10.5.2
— SERVO CALIBRATION KEY
LOCK
see Chapter 10.5.2
— MENU 1/2 Menu screen 1/2
— WEIGHING OPERATION Weighing operation screen
— WEIGHING OPERATION SETTING 1/2 Weighing operation setting screen 1/2
— CONTROL MODE see Chapter 11.7.2
— COMPARISON see Chapter 11.7.2
— COMP. OF ZERO BAND see Chapter 11.7.2
— COMPARATIVE OF FULL see Chapter 11.7.2
— SAVE THE A.F.F. see Chapter 11.7.2
— BATCHING SAFETY CHECK see Chapter 11.7.2
— DISCH. SAFETY CHECK see Chapter 11.7.2
— MIXING SAFETY CHECK see Chapter 11.7.2
— GENERAL SAFETY CHECK see Chapter 11.7.2
— WEIGHING OPERATION SETTING 2/2 Weighing operation setting screen 2/2
— AUTOMATIC ACCUM. see Chapter 11.7.2
— CONDITION OF AUTO ACM. see Chapter 11.7.2
— AUTOMATIC PRINT see Chapter 11.7.2
— MENU 1/2 Menu screen 1/2
— SEQUENCE CONTROL Sequence control screen
— SEQUENCE CONTROL 1/3 Sequence control screen 1/3
— BATCH START SEQUENCE see Chapter 11.8.2
— OPERATION OF NOZZLE see Chapter 11.8.2
— JUDGE CONDITION see Chapter 11.8.2
20.1.4 WEIGHING OPERATIONS
WEIGHING
WEIGHING OPERATION
20.1.5 SEQUENCE CONTROL
WEIGHING
SEQUENCE CONTROL
Weight Controller CSD-918 20 Appendix
EN-206 Minebea Intec