Minebea Intec Combics CAPXS U Series, Operating Instructions Manual, Page: 2 / 24

2
Combics CAPXS.U
Combics CAPXS.U 3
2 Symbols
2 Intended Use
3 Safety Instuctions
4 Warranty
5 Setting Up the Scale
7 Installation
8 Operating Limits
9 Care and Maintenance
10 Accessories
12 Certificates of Compliance
The following symbols are used in these instructions:
§
Indicates required steps
$ Indicates steps required only under certain conditions
> Describes what happens after you have performed a certain step
– Indicates an item in a list
! Indicates a hazard
Make sure you observe the following warning and safety
information in its entirety during installation and operation,
as well as while performing maintenance and repair work on the
equipment. It is important that all personnel using the Combics
equipment understand this information, and have access to it
at all times.
Furthermore, the warning and safety information supplied
with any electrical equipment connected, such as the indicator,
must be observed as well. The warning and safety information
can be supplemented by the equipment operator. Make sure all
operating personnel are informed of any additions to these
instructions.
The weighing platform and the connected indicator are intended
exclusively for use in weighing.
2
Contents Intended Use