8
I. Unit parts identification
1. Door with ventilation outlet.
2. Front panel
3. Door release button
4. Pilot light (power)
5. Pilot light (sani wash)
6. Hot-wash / eco button
7. Power button
8. Program / timer selector
9. Tank to rinse product
10. Spray arm
11. Filter
12. Detergent location
13. Door assembly
14. Door latch mechanism
15. Water inlet connection
16. Drain hose connection
17. Power cord
II. Instruction for starting
1. Water pressure
For best operating results, incoming water pressure should be between 0.3 and 10
bar.
Your dishwasher cleans by spraying a mixture of hot clean water and detergent
(under pressure) against the soiled surface of dishes. The water is pumped trough a
rotating spray arm, drained through a filter removing food and soiled particles and
pumped back through the spray arm.
2. Connection of the dishwasher
Your dishwasher is delivered with 2 pipes: arrival and drainage of water.
A tap of water arrival must be installed before connecting the dishwasher.
Screw the water inlet connection to the back of the dishwasher.
Screw the other end of the connector of arrival of water to the water tap.
Screw the drain hose connector to the back of the dishwasher.
Place the other end of the drain hose connector in the flue.
Open the water tap slowly and check that there is no water leakage.
The height minimum to install your dishwasher between two pieces of furniture is
43.8 cm. You ensure that a source of power corresponds to the length of the cord of
food: 1.80 M.
The dishwasher must be installed on a solid and plane surface.